 With
the introduction of the POLITE range of traffic calming
systems, you can now install a speed hump that has been
designed and purpose built to suit your exact application.
In the past "one size suits all" attitude
had been adopted, simply because of the lack of alternatives.
Certain traffic conditions are difficult or impossible
to control with most standard systems currently available
and often the wrong size speed hump installed for the
wrong application can actually become a hazard, causing
passenger discomfort and potential vehicle damage.
This is why PEC now offers an extensive range of speed
humps in 350mm, 600mm, 900mm and 2000mm widths to suit
every application. Unlike inferior recycled rubber or
recycled plastic products, the PEC range of speed humps
are produced from natural rubber or premium quality,
high impact polypropylene plastic to ensure quiet, long
life, tailor made results. PEC qualified technicians
can advise, supply and install a traffic calming solution
to suit your needs.
350mm Traffic Calmer: For speeds up to 10km/h or less.
The system is made up of black rubber sections and yellow
rubber sections, which are laid out alternatively to
produce a black and yellow striped speed hump. When
laid out in the alternating pattern, the speed hump
complies with AS/NZ 2890-12004 Type 2 Off Road Speed
Humps.
These sections come either 250mm or 500mm. Another feature
is that the yellow sections are produced from natural
yellow rubber, so they will always remain yellow. Ideal
uses for the 350mm Traffic Calmer include: above or
below ground multi deck car parks, smaller public car
parks, shopping malls, drive throughs - ideally for
narrower roadways where the desired speed is 10km/h
or less.
|
900mm
Natural Rubber Speed Hump